All Around View Wireless Vehicle Camera System
4 Channel Screen with Recording

Why we need wireless vehicle camera system?

Visionewcam Wireless Camera System for Bus
  1. No messy cables. Connection between monitor and camera is without any cable. So that you can mount the whole system easier in your vehicle.
  1. Full view for your vehicles, including front view, side view, and back view. No afraid of blind point. Keep the people around your vehicles safety, as well as yours safety.
  1. Waterproof cameras. Forward view and rear view cameras are IP69K waterproof level, white side view cameras are IP68. Excellent waterproof level can allow cameras working well outside, even in rainy or foggy days.
  1. Large memory card for monitor. Max 128G storage capacity protects the driver from unnecessary trouble. Meanwhile, the recording helps to manager the fleet if need.
  1. 12 months quality guarantee. Long warranty provides more service for you. R&D team here offer any question you want to know.

 

What is wireless vehicle camera system?

Visionewcam Wireless Camera System Mono View
Visionewcam Wireless Camera System Split View
Visionewcam Wireless Camera System Around View
Visionewcam Wireless Camera System Quad View

This wireless vehicle camera system is widely used for different kinds of vehicles safety monitoring, such as forklift truck, trailer RV, heavy truck, excavator, heavy equipment, mining, farm equipment, tractor truck ,bus, coach, school bus, garbage truck, trailer truck, van fleet, fire trucks, ambulance, Cash-In-Transit, port crane boa, rail tram, airport vehicle, crane truck, CAT truck, caterpillar truck, dump truck, LPG truck, etc.

Lots of people have a headache on connecting monitor and cameras with quite long cables, especially for long truck. This system can help you get rid of this trouble, and save plenty of time for you. Adopting 2400 – 2483.5 MHz frequency, wireless connection is smooth in transmission from cameras to monitor. Double antennas for monitor enhance the signal to receiving image from cameras.

Compared with 2.4ghz analog wireless system, our 2.4ghz digital wireless system is much safer. This is because 2.4ghz digital wireless using encryption protocol to secure the data, preventing unrelated person from viewing from this system. That is to say, the encryption protocol likes a key, to protect your data from the system.

Specification

Monitor datasheet:

LCD size 9″  

Resolution 800 x 3 (RGB) x 480

Contrast 500:01:00

Brightness 400 cd/m²

Viewing Angle U: 50 / D: 70, R/L: 70

Aspect Ratio 16:09

Channel 4 channels

Operating Frequency 2400 – 2483.5 MHz

Transmitting Distance 30-120 M

Recieving Sensitivity -89 dBm

Decompression Form MPEG4

Emitting Frequency 17 dBm

Modulation 2.4G FSK/GFSK

TF Card Max.  128G

Time Delay 120ms

System Format PAL / NTSC

Power Consumption Max. 6W

Loudspeaker 1.5W/8Ω

Operating Temperature -20~+70ºC, RH 90%

Storage Temperature -30~+80℃, RH 90%

Waterproof IP65 if need

Camera Datasheet:

Image Device 1/3″ CMOS

TV System PAL / NTSC

Effective Pixels 728(H)*488(V)

Sensing Area 4.80 mm (H) ×3.73 mm (V)

Scan Mode Progressive

Sync. System Internal

Horizontal Resolution 700 TV Lines

Minimum Illumination 0.05 Lux (day), 0 Lux (with IR)

Microphone Yes

AUTO Electronic Exposure AUTO

AGC Auto

S/N Ratio 46.5dB

White Balance Auto

BLC Auto

Current Consumption Max. 220 mA/12V

Power Supply DC 12-32 V

Operating frequency 2400 -2483.5 MHz

Transmitting distance 30-120M

Transmitting speed 12Mbps

Decompression form MPEG4

Transmit output power 17 dBm

Lens f = 2.8mm

Lens Angle 120°

Operating Temperature -20°C~60°C, RH 90% MAX.

Storage Temperature -30°C~80°C, RH 90% MAX.

Waterproof IP68~IP69K

Q&A

Visionewcam Bus Camera System

 

 

Q1: How can we power the whole system?

A1: The power can be from the vehicle, or external power bank designed from us.

 

Q2: Does WIRELESS here mean the whole system WITHOUT ANY CABLE?

A2: No. WIRELESS here only means the connection between monitor and camera is without any cable. But each monitor and camera still has its own power cable.

 

Q3: How to connect monitor and camera?

A3: We can help to connect monitor and camera here before shipment if need. If you want to connect it by yourself, pls do that step by step.

  1. Power up monitor first.
  2. Press the PAIR key on the remote control for monitor.
  3. When the display is showing “PAIRING START 50”, power up camera.

Q4: How much voltage can the system be made?

A4: Up to DC55V for the forklift truck if need.

 

Q5: How many cameras can work at the same time?

A5: Four cameras.

 

Q6: What is included in the whole system?

A6: It is included 1pcs 9 inch monitor, 4pcs cameras and free accessories.